Measuring Instruments

We Deal In Full Line of Fluke's test tools. Products include handheld digital multimeters, basic electrical testers, ScopeMeters, installation testers, field calibration tools, power quality tools, clamp meters, digital thermometers, thermal imagers, insulation testers, EX test tools, portable appliance testers, indoor air quality tools and accessories.

• True-rms Multimeter With Backlight and Temperature
• Wide 1000 V Measurement Range
• Capacitance, Resistance, Continuity and Frequency
• Large, Easy-to-read Display
• Min/max to Record Signal Fluctuations
• Number_Of_Items: 1

• Delivery Time: 5 Days
• Packaging Details: ¿¿¿ Fluke Technologies Pvt Ltd, Art Guild House, Kurla West Mumbai-400070

• Meaurement Range: 2gm Ohm
• Test Voltage: 500 Volts, 1000 V
• Test Current: 1 Ma Nominal
• Auto Discharge: Discharge Time0.5 Second for C= 1 F or Less
• Live Circuit Indicator: Inhibit Test if Terminal Voltage> 30 V Prior to Initializations of Test

Models : DIT 918Features :

• 3½ Digit 1999 Count Large LCD Display
• High Accuracy for Insulation Measurement and for AC Voltage Measurement
• Range Selection & Single Person Push Button Operation
• LCD with Indicator Switch
• Data Holding Function, Function Icons on Display
• Measurement of AC Voltage upto 600VAC
• Auto Range (Insulation Test)
• Red LED Indicator for HV (High Voltage)
• Battery Operated
• As per IS10656-1983
• As per Safety Standard IEC / EN 61010-1 & 61010-31
• Over Voltage CAT III, 600V
• As per EMC Standard IEC 61326 Class B

• flex Flexible Current Probe Expands the Measurement Range to 2500 a Ac
• True-rms Ac Voltage and Current for Accurate Measurements on Non-linear Signals
• Large, Easy to Read Backlight Display Automatically Sets the Correct Measurement Range So You Do Not Need to Change the Switch Positions While Taking a Measurement

• Minimum Order Quantity: 1 Piece
• Delivery Time: 1 to 2 day
• Packaging Details: Fluke Technologies Pvt Ltd, Art Guild House,

• 0 to 200,000 Lux
• Auto ranging measurement
• Measures both Lux and Foot-Candles(FC)
• High accuracy and rapid response sampling time
• Temperature measurement inV/T
• Color LCD display with backlight
• Over range indication, Low Battery indication
• MAX/MIN/DATA HOLD
• Enable/Disable auto power off

• Measures Earth Resistance at electrical ground rod and grid.
• Use for testing quality of grounding without disconnecting the ground rod under test.
• Conduct field surveys fast and effectively and retrieve and analyze readings at a later time.
• Use on telecommunication Tower’s grounding.
• Useful in finding earth fault such as discontinuation or loose contact of earthling strips or cables.
• To find the resistance of earth pit.

This instrument can measure the air pressure of the single pipe or differential pressure of two pipes. It is suitable
for measuring of ventilation and air condition systems, and widely use for gas measurement

‘MEXTECH’ Digital Earth Resistance Tester is designed to measure the resistance if earth used in
power circuit, Telecommunications, Railway Electrification, Domestic and Industrial electrical
installations. The tester measures directly the resistance of the earth andalso measure the ground
resistivity. The study, elegant and compact body makes the instrument portable, easy to use, Handheld
instrument.

• Operating Humidity : Rh 80 %, Storage Humidity : Rh 70 %
• Battery Life : 32 Hours Approx, Jaw Opening : Cable ¸ 43 Mm(Max.)
• Operating Temperature : 0c to 50c (32f to 122f)

• Memory and Read Function
• Right Device to Know the True-life of Battery Capacity (Resistance / Voltage) Simultaneously Measure
• On-line Testing Without Shutting Down Battery
• Built-in Comparator Function
• Rates Conditions as Pass Warning or Fail

• Delivery Time: 1 to 2 day

• Measuring Range: 40mv,400mv
• Accuracy: ±1%rdg,±10 Dgts
• Resolution:10mv,100mv
• Display: Pass (Green Led) : to Indicate the Tested Battery Led Display:pass (Green Led) : to Indicate the Tested Battery Complies With the High Limit of Comparator
• Warning (Yellow Led) : to Indicate That the Tested Battery is Going to Deteriorate

• Delivery Time: 7 to 10 day
• Packaging Details: Meco meters Pvt Ltd, EL-60, MIDC Electronic Zone, TTC Ind, Area Mahape, Navi Mumbai

Models : PSI 2016Features :

• 3 Phase Sequence Indication via LED & Buzzer
• Reverse Phase Indication via LED & Buzzer
• Open Phase Indication via LED & Buzzer 
• No Battery Required 
• Rugged & Handy
• Easy & Safe to Use
• Coloured Test Probes with Heavy Duty Insulated Crocodile Clips for R, Y, B Phase Connections
• Phase Presence Indication from as low as 60 V AC (PH-N)

• Display :LCD Display with Backlight
• Zero Adjustment Key.
• Low battery indication
• Fuse Protection.
• Backlight Shut down after 7 Sec.
• Power: 9V X 1 battery
• Operation Temperature & Humidity: 25 °C, RH.<75%.
• Display Size : 64 X 35 mm.
• Unit Size : 185 X 90 X 53 mm.

Weight : Approx. 380g   (Including Battery )

• Can be operated by ANDROID operate phone or tablet
• Touch screen, Data to excel via Bluetooth or USB cable
• 22 roughness parameters
• Displays roughness values, profile and curve
• Built-in lithium battery with 50 hours working time

• Delivery Time: 5 to 7 DAYS

• 5 in 1 Light meter, Sound level meter, Humidity/ Temperature meter, Anemometer
• Large Backlit LCD display
• Data Hold and Max Hold
• Over-range indication Low battery indication

Widely used for Boilers, Refrigeration Industry, Ventilation Duct, Environment monitor, Navigation Measurement, Weather Forecast & Fire Department.

This is a Digital LCR Meter With Inductance, Resistance,  Capacitance & Continuity  Measurement

Widely used in Floor maintenance, Surface cleaning quality control, Stone and tile gloss
measurement, Checking printed matter, Quality control of paint and ink, Polished metal surface , Inspection
of paint protection and waxing, Auto body

The Fe function measure the thickness of non-magnetic materials (e.g. paint, plastic, por
celain enamel, copper, zinc, aluminum, chrome etc.) on magnetic Materials (e.g. Iron, nickel etc.). Often
used to measure the thickness of galvanizing layer, lacquer layer, porcelain enamel layer, phosphide la
yer, copper tile, aluminum tile, some alloy tile, paper etc.
The NF function measure the thickness of non-magnetic coatings on non-magnetic metals. It is used on a
nodizing, varnish, paint, enamel, plastic coatings, powder, etc. applied to aluminum, brass, non-magneti
c stainless steel, etc